Complete Range for Engine & Tractor Parts

16 1/4 x 1 1/8 inch UNC

622 - 795mm CAT 2/2 Thread: 1 1/4 inch UNC Tube Length: 420mm

1.25mm Thick

RING SET 0.50mm

1.2mm

LOWER LINK MOUNTING PIN CAT2

Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.

ROCKER SHAFT ASSY

FITS LATER TYPE SGI CRANKSHAFT WITH BIGGER CONROD JOURNAL USE WITH 67.99mm JOURNAL DIAMETER

TOP LINK ASSY - 580-760mm CAT 20mm/2

LINER

Splined nose lip seal 3 holes on nose 10 bolt flywheel