TRANSMISSION

16 1/4 x 1 1/8 inch UNC

622 - 795mm CAT 2/2 Thread: 1 1/4 inch UNC Tube Length: 420mm

Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Standard Size Dimensions: Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Standard Size Dimensions: Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Stem: 9.4mm Length: 145.8mm Head: 46.8mm Angle: 30°

LOWER LINK MOUNTING PIN CAT2

IDLER GEAR NEEDLE BEARING

Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.

CIRCLIP 36 x 1.75mm

FLYWHEEL ASSY

STARTER RING GEAR