TRANSMISSION

Internal Thread

SYNCHRONIZER RING

OUTPUT SHAFT GEAR - 49 TEETH

Internal Splines

16 Teeth 38 Splines

16 Teeth 38 Internal Splines 27 External Splines

IDLER GEAR NEEDLE BEARING

Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.

CIRCLIP 36 x 1.75mm

12 Volts 4.2Kw 10 Teeth 4 Bolt Fixing

24 Volt 3.2 Kw 9 Teeth

SOLENOID