TRANSMISSION
- 
                        
    BRAKE BOOT SEAL
- 
                        
    BRAKE ACTUATOR SPRING
- 
                        
    Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.
- 
                        
    BRAKE PEDAL ROD
- 
                        
    HAND BRAKE ROD
- 
                        
    FLYWHEEL ASSY
- 
                        
    259.6 x 266.4 x 3.4mm
- 
                        
    AXLE PIN
- 
                        
    BRAKE DISC SEAL
- 
                        
    STARTER RING GEAR
- 
                        
    Internal Diameter 13 15/16. INCH
- 
                        
    OD: 37.1 ID: 32 Width 39.8mm
Login and Registration Form