TRANSMISSION

DRAG LINK END

Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Standard Size Dimensions: Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Standard Size Dimensions: Stem: 9.5mm Length: 146.1mm Head: 45.9mm Angle: 45°

Stem: 9.4mm Length: 145.8mm Head: 46.8mm Angle: 30°

INJECTION PUMP CAM RING

INJECTION PUMP SEAL KIT

INJECTION PUMP TRANSFER BLADES

Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.

Industrial Applications

INJECTOR PIPE No. 2

FLYWHEEL ASSY