30° INLET VALVE SEAT ANGLE CLAMP TYPE INJECTOR MANIFOLD STUD SIZE M10 X 1.5 Assembled in UK with genuine valve train kit

With Pin & Clips Perkins AK Engines

With Rings, Pin & Clips

FUEL SHUT OFF SOLENOID

Stem: 8.9mm Length: 123.0mm Head: 45.0mm Angle: 45°

Stem: 9.0mm Length: 124.2mm Head: 42.0mm Angle: 45°

REAR CRANK SEAL IN HOUSING

M11 x 1.25 x 65mm

SINGLE FILTER HEAD

12V 10 TEETH LUCAS M127 TYPE STARTER OUTPUT 2.8KW FITTED WITH ZEN DRIVE

ISKRA GEAR REDUCTION TYPE 10 TEETH 12 VOLTS 3.2KW

Fitted with 3135X042 liners fully finished 100mm bore size. Plateau honed bore. Industrial / Construction TURBO & NON TURBO applications. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.