BLOCK

RING SET +0.50mm

Fitted with 3135X042 liners fully finished 100mm bore size.Plateau honed bore. Agricultural / Construction TURBO & NON TURBO applications Left hand mounted starter motor. Turbo charger drain holes and oil filter blanking plates may need to be removed from old engine and fitted to new. Fitted with Piston Cooling Jets. If not required, please remove and re-fit blanking screws and washers.

FITS LATER TYPE SGI CRANKSHAFT WITH BIGGER CONROD JOURNAL USE WITH 67.99mm JOURNAL DIAMETER

LINER

Splined nose lip seal 3 holes on nose 10 bolt flywheel

M10 x 1 x 50mm Fits Con Rod EM9837/38/39/40/41/42

CAMSHAFT

OD: 76.15/57.3mm ID: 50.4mm Width: 14.3/3.57mm

OD: 42.27 ID: 38.12 Width: 20.95/32.65mm Tapered

Without Sensor Hole

IDLER GEAR

IDLER GEAR